Skip to content
Homeowner Cost Guide

Spokane Electrical Prices and Cost Guide

Compare typical national electrical price ranges with adjusted Spokane planning estimates before contacting local electricians.

View prices Quote checklist Find a Spokane Electrician

Typical electrical cost ranges

Each row starts with a typical national planning range, then shows an adjusted Spokane range when local pricing modifiers or overrides are available.

Why local pricing may differ: Local labor rates, permit needs, venting and code updates, winter demand, and brand/availability in Spokane can shift totals compared with national averages.
ServiceTypical Estimated Cost
Electrical Panel Upgrade Installed project
Typical national range$1,000 - $7,000 Spokane adjusted range$1,000 - $7,000
Per Project
Whole Home Rewiring Installed project
Typical national range$4,000 - $30,000 Spokane adjusted range$4,000 - $30,000
Per Project
EV Charger Installation Installed project
Typical national range$700 - $4,000 Spokane adjusted range$700 - $4,000
Per Project
Generator Installation Installed project
Typical national range$5,000 - $25,000 Spokane adjusted range$5,000 - $25,000
Per Project
Outlet Installation Installed project
Typical national range$80 - $700 Spokane adjusted range$80 - $700
Per Fixture
Light Fixture Installation Installed project
Typical national range$100 - $900 Spokane adjusted range$100 - $900
Per Fixture
Ceiling Fan Installation Installed project
Typical national range$125 - $1,200 Spokane adjusted range$125 - $1,200
Per Fixture
Surge Protection Installation Installed project
Typical national range$200 - $1,100 Spokane adjusted range$200 - $1,100
Per Project
Smart Home Wiring Installed project
Typical national range$1,500 - $20,000 Spokane adjusted range$1,500 - $20,000
Per Project
Electrical Troubleshooting Troubleshooting visit with diagnosis and minor repair
Typical national range$100 - $800 Spokane adjusted range$100 - $800
Per Visit
Hot Tub Wiring Installed project
Typical national range$700 - $4,200 Spokane adjusted range$700 - $4,200
Per Project
Sub Panel Installation Installed project
Typical national range$600 - $3,000 Spokane adjusted range$600 - $3,000
Per Project
Dedicated Circuit Installation Installed project
Typical national range$400 - $1,500 Spokane adjusted range$400 - $1,500
Per Project
Emergency Electrical Service Emergency service call with diagnostic and first hour, plus after-hours premiums; parts extra
Typical national range$150 - $900 Spokane adjusted range$150 - $900
Per Visit

What affects electrical pricing?

The details below come from the same pricing research used to power the city price tables.

Electrical Panel Upgrade

Installed project
Typical national range$1,000 - $7,000 Spokane adjusted range$1,000 - $7,000

Common cost factors

  • Amperage and panel type: Upgrading from 100A to 200A, main breaker vs. subpanel, brand/quality affect material and labor.
  • Labor complexity: Service relocation, tight spaces, drywall work, conduit, and permit/inspection time increase hours.
  • Code upgrades and repairs: Grounding/bonding, meter/main upgrades, AFCI/GFCI breakers, and bringing older homes to code add cost.
  • Site conditions: Distance to service, line/mast upgrades, utility coordination, and weatherproofing for exterior panels.

Common price components

  • Labor (licensed electrician + helper) - $1,200 - $3,500Panel swap, wiring terminations, labeling, service tie-in, testing, and inspections.
  • Panel, breakers, materials - $600 - $1,800200A load center, main breaker, AFCI/GFCI/dual-function breakers as required, grounding/bonding, lugs.
  • Permits and inspections - $100 - $600Local permit application and required inspections.
  • Service/meter/mast and code upgrades - $300 - $1,500Utility coordination, meter base, service mast/conduit, grounding electrode upgrades as needed.
  • Patching and incidental repairs - $100 - $600Drywall/access repairs or weatherproofing after installation.

Whole Home Rewiring

Installed project
Typical national range$4,000 - $30,000 Spokane adjusted range$4,000 - $30,000

Common cost factors

  • Home size and square footage: More circuits, longer runs, and more devices increase labor and materials.
  • Access and wall conditions: Open walls vs. fishing wire in finished walls; plaster/lath and tight crawlspaces raise labor.
  • Service upgrade and panel work: Upgrading to 200A, new panel, and meter work adds cost.
  • Code updates and AFCI/GFCI: Arc-fault/GFCI protection and additional circuits per code increase materials and labor.

Common price components

  • Labor (demolition, fishing, terminations) - $5,000 - $16,000Electrician and helper hours to remove/abandon old wiring and install new runs, boxes, and devices.
  • Materials (cable, boxes, devices, breakers) - $1,500 - $6,000NM cable/MC, receptacles/switches, AFCI/GFCI breakers, connectors, staples, plates.
  • Service/panel upgrade (if needed) - $1,500 - $6,000New panel, service conductors, grounding/bonding, meter base adjustments.
  • Permits and inspections - $200 - $1,500Local permit fees and required inspection costs.
  • Wall repair/patching allowance - $500 - $2,000Basic patches from access holes; full finish/paint often priced separately.

EV Charger Installation

Installed project
Typical national range$700 - $4,000 Spokane adjusted range$700 - $4,000

Common cost factors

  • Service panel capacity/upgrade: Panel upgrades, new breakers, or load management add significant labor and materials.
  • Distance/wiring run: Longer conduit/wire runs and difficult routes increase labor and materials.
  • Permits and code requirements: Local permits, GFCI/AFCI needs, and inspections add time and fees.
  • Charger amperage and features: Higher amperage or smart units may require heavier wiring and setup time.

Common price components

  • Labor (licensed electrician) - $500 - $1,800Site prep, dedicated circuit, wiring/conduit, breaker install, mounting, testing, and commissioning.
  • Materials & Hardware - $200 - $800Wire, conduit, fittings, breaker, mounting hardware, disconnects as required.
  • Permits & Inspection - $50 - $250Local permit fees and inspection coordination.
  • Panel Upgrade or Load Management (if needed) - $600 - $1,500Service/panel work, load management device, or subpanel when capacity is limited.

Generator Installation

Installed project
Typical national range$5,000 - $25,000 Spokane adjusted range$5,000 - $25,000

Common cost factors

  • Generator size (kW): Larger units cost more and may need heavier-gauge wiring and larger gas lines.
  • Electrical scope: Transfer switch type, panel upgrades, interlock/ATS, and wiring runs affect labor/materials.
  • Fuel and gas work: Natural gas or propane line installation, regulators, and meter upsizing add cost.
  • Site conditions: Pad, trenching, distance to panel/gas, permits, and accessibility drive time and materials.

Common price components

  • Generator and ATS package - $3,500 - $9,000Standby generator and automatic transfer switch; size/brand dependent.
  • Electrical labor and materials - $2,000 - $5,000Wiring, conduit, breakers, panel work, transfer switch install, commissioning.
  • Fuel/gas scope - $1,000 - $4,000Natural gas or propane line, regulators, connections; excludes propane tank purchase.
  • Site work and pad - $300 - $1,500Concrete or composite pad, leveling, minor trenching.
  • Permits and inspections - $200 - $600Electrical, mechanical, and local permit fees.

Outlet Installation

Installed project
Typical national range$80 - $700 Spokane adjusted range$80 - $700

Common cost factors

  • Outlet type and rating: Standard vs. GFCI/AFCI, 20A, tamper/weather resistant increase parts and labor.
  • Access and wall type: Finished walls, masonry, tile, or floor outlets add time and materials.
  • Distance to power/source: Longer runs, fishing wire, or adding a new circuit raises cost.
  • Panel capacity and code upgrades: Breaker availability, GFCI/AFCI requirements, and grounding add costs.

Common price components

  • Labor - $120 - $400Licensed electrician time, troubleshooting, installation, testing, permit if needed.
  • Materials - $10 - $80Receptacle (standard/GFCI/AFCI), box, cover plate, cable, staples, connectors.
  • Access/Finish Work - Up to $120Drywall cuts/patching, surface raceway, masonry drilling, floor box install.
  • Service Call/Overhead - Up to $100Trip charge, small-job minimums, scheduling/administration.

Light Fixture Installation

Installed project
Typical national range$100 - $900 Spokane adjusted range$100 - $900

Common cost factors

  • Fixture type/complexity: Heavier or specialty fixtures (chandeliers, fans, smart controls) take longer and may need extra support.
  • Wiring condition: Old wiring, no existing box, or code upgrades increase labor and materials.
  • Ceiling height/access: Tall or hard-to-access areas require two techs, ladders, or scaffolding.
  • Location and travel: Local labor rates and trip minimums affect per-fixture pricing.

Common price components

  • Labor (electrician) - $120 - $380On-site minimum, remove old, mount box/bracket, connect wiring, test.
  • Materials/parts (excl. fixture) - $15 - $70Mounting box, anchors/bracing, wire nuts, pigtails, fasteners.
  • Disposal and setup - $10 - $30Protective covering, cleanup, haul-away of old fixture/packaging.
  • Adders: new box/brace or high ceiling - $35 - $200Ceiling brace install, tall ladder/scaffold time, second tech if required.

Ceiling Fan Installation

Installed project
Typical national range$125 - $1,200 Spokane adjusted range$125 - $1,200

Common cost factors

  • Existing wiring and fan-rated box: New wiring or adding a fan-rated box increases labor and materials.
  • Ceiling height/access: Vaulted or high ceilings require extra time, ladders, or scaffolding.
  • Control type: Wall switches, remotes, or multi-speed/light kits add wiring and setup.
  • Location and permit: Local labor rates and permitting/inspection can raise costs.

Common price components

  • Labor (electrician/installer) - $150 - $800Removal (if needed), mounting fan-rated box, wiring, controls, testing; higher for new circuits or vaulted ceilings.
  • Materials & small parts - $20 - $120Fan-rated box, brace, wire/connectors, switch, wall control, fasteners.
  • Disposal/haul-away - Up to $40Old fan/packaging removal if requested.
  • Permit/inspection (where required) - Up to $80Local electrical permit fees when applicable.

Surge Protection Installation

Installed project
Typical national range$200 - $1,100 Spokane adjusted range$200 - $1,100

Common cost factors

  • Surge protector type and rating: Higher kA ratings, brand, and features (SCCR, indicators, replaceable modules) increase material cost.
  • Panel condition and complexity: Crowded panels, need for tandem breakers, wiring extensions, or minor remediation add labor/materials.
  • Service configuration: Meter/main combo, subpanels, or longer conductor runs can add time and parts.
  • Local labor rates and travel: Market rates, licensing requirements, and trip minimums impact total price.

Common price components

  • Labor (installation and setup) - $140 - $400Licensed electrician to mount device, connect to panel, torque, labeling, and testing.
  • Surge protector device (SPD) - $100 - $450Whole-home Type 1/Type 2 unit; higher-rated or brand-name models cost more.
  • Materials and incidentals - $20 - $75Conductors, conduit/fittings, hardware, breakers if required, labeling.
  • Permit/inspection (if required) - Up to $150Local permit fees and administrative time where applicable.

Smart Home Wiring

Installed project
Typical national range$1,500 - $20,000 Spokane adjusted range$1,500 - $20,000

Common cost factors

  • Home size and number of circuits/zones: More rooms and runs increase material and labor time.
  • New pre-wire vs retrofit: Retrofits require fishing wires, patch/paint, and more labor.
  • System scope: Lighting, audio, security, networking, and controls add devices and programming.
  • Device/brand selection: Pro-grade hubs, panels, and wired sensors cost more than entry-level gear.

Common price components

  • Labor (installation & programming) - $1,800 - $8,000Electrical and low‑voltage rough‑in/trim, device install, setup, and commissioning.
  • Materials & Devices - $800 - $9,000Cabling, hubs/controllers, switches/dimmers, sensors, panels, racks, terminations.
  • Wall repairs & finishes (if retrofit) - $200 - $1,500Drywall patching, paint, minor carpentry from wire fishing.
  • Network & Power Upgrades (as needed) - Up to $2,500Panel/branch upgrades, PoE switches, UPS, structured media enclosure.

Electrical Troubleshooting

Troubleshooting visit with diagnosis and minor repair
Typical national range$100 - $800 Spokane adjusted range$100 - $800

Common cost factors

  • Issue complexity: Simple outlet/switch faults take less time; wiring faults, circuit tracing, or panel issues take longer.
  • Time on site: Most pros bill hourly plus a service/diagnostic fee; longer diagnostics or repairs increase cost.
  • Parts/materials: Replacement outlets, switches, breakers, or connectors add to totals.
  • Travel and minimums: Service-call or diagnostic fees and first-hour minimums affect the base visit cost.

Common price components

  • Service/Diagnostic Fee - $75 - $150Trip charge and initial problem assessment.
  • Labor (1–3 hours typical) - $100 - $450Hourly rate for troubleshooting and minor repair.
  • Parts/Materials - $25 - $100Common items like outlets, switches, connectors, or small breakers.

Hot Tub Wiring

Installed project
Typical national range$700 - $4,200 Spokane adjusted range$700 - $4,200

Common cost factors

  • Distance and trenching: Longer runs and underground conduit increase labor and material.
  • Panel capacity and upgrades: Subpanel or main panel upgrades add substantial cost.
  • Local code/permits and GFCI requirements: Inspection, permits, and required disconnects/GFCI add time and materials.
  • Site conditions: Accessibility, concrete/asphalt crossing, and obstacles affect labor.

Common price components

  • Labor (licensed electrician) - $700 - $2,500On-site assessment, routing, trenching/penetrations, installation, terminations, testing.
  • Materials (wire, conduit, GFCI breaker, disconnect) - $200 - $900Copper conductors, PVC/EMT, fittings, spa disconnect, GFCI breaker.
  • Panel/subpanel work (if needed) - $300 - $1,200Panel upgrades, subpanel install, load balancing as required.
  • Permits and inspection - $75 - $250Local permit fees and utility/ AHJ inspections.

Sub Panel Installation

Installed project
Typical national range$600 - $3,000 Spokane adjusted range$600 - $3,000

Common cost factors

  • Amperage and panel type: Higher-amp subpanels and quality/load-center brands increase material and labor.
  • Distance/routing from main panel: Longer runs and difficult paths raise conduit/cable and labor time.
  • Site conditions and accessibility: Finished walls, tight spaces, or code upgrades add time and materials.
  • Permits and inspections: Local permit/inspection fees and admin time vary by jurisdiction.

Common price components

  • Subpanel, breakers, materials - $250 - $700Subpanel/load center, breakers, grounding/bonding, lugs, connectors, box, misc.
  • Feeder wiring and conduit - $150 - $700Copper/aluminum feeders, conduit, fittings; varies with distance and routing.
  • Labor (installation & testing) - $400 - $1,200Mounting, pull/run feeders, terminations, labeling, commissioning.
  • Permits and inspection admin - $75 - $200Permit fees, scheduling, compliance documentation.

Dedicated Circuit Installation

Installed project
Typical national range$400 - $1,500 Spokane adjusted range$400 - $1,500

Common cost factors

  • Circuit amperage and load: Higher amp circuits (e.g., ranges, EVs) require thicker wire/breakers, raising material and labor.
  • Run length and access: Longer distances and difficult fishing through finished walls/attics increase labor time.
  • Panel capacity and upgrades: Full panels or need for AFCI/GFCI breakers or subpanel adds cost.
  • Permits and code requirements: Local permit fees and inspection requirements add time and expense.

Common price components

  • Labor (electrician) - $300 - $800Onsite assessment, routing, pulling cable, installing receptacle or connection, labeling, testing.
  • Materials - $150 - $400Breaker (AFCI/GFCI if required), cable/conduit, box/receptacle, fittings, staples.
  • Permit/Inspection - $50 - $150Municipal permit and inspection fees where required.
  • Complexity/Upgrades Allowance - $100 - $300Long runs, difficult fishing, minor panel work or patching coordination.

Emergency Electrical Service

Emergency service call with diagnostic and first hour, plus after-hours premiums; parts extra
Typical national range$150 - $900 Spokane adjusted range$150 - $900

Common cost factors

  • After-hours premium: Nights/weekends/holidays often add flat fees or higher hourly rates.
  • Minimums and travel: Trip charges and 1–2 hour minimums raise per-visit totals.
  • Scope/complexity: Troubleshooting time and urgency can extend billable hours.
  • Region and company size: Higher costs in major metros and from larger firms.

Common price components

  • Emergency/after-hours fee - $100 - $200Flat surcharge for urgent response outside normal hours.
  • Labor (first hour) - $150 - $300Premium hourly rate for diagnosis and immediate repairs.
  • Additional labor (per hour) - $100 - $250Ongoing troubleshooting or repairs after the first hour.
  • Trip/dispatch fee - Up to $150Travel or service area surcharge when applicable.
  • Materials/parts - $25 - $200Common parts like breakers, outlets, wire; varies by issue.

Pricing questions homeowners often ask

  • Are these electrical prices guaranteed?
    No. They are broad planning ranges. The final quote depends on scope, access, materials, timing, permits, and the company doing the work.
  • Why can two quotes be so different?
    Companies may include different labor, materials, warranty coverage, travel, cleanup, disposal, or inspection support. Ask each company to quote the same scope before comparing.
  • Should I choose the lowest estimate?
    Not automatically. Compare price with review history, profile detail, communication, warranty terms, and whether the company seems like a strong fit for your project.
Local Company Comparison

Ready to compare local electricians?

Compare local electricians in Spokane by reviews, profile detail, services, and available pricing estimates.

View Electricians in Spokane