Skip to content
Service Guide

Stump Grinding and Removal

Stump grinding uses a machine with a spinning cutting wheel to chew a leftover tree stump into chips, usually to a few inches below the ground. Stump removal goes further and digs or pulls out the stump and its main roots.

Typical rangeUS: $100 - $700
Next stepCompare local tree service companies
Use this forCosts, questions, and project fit

What homeowners should know

Most companies charge by the stump's diameter, often about $2 to $5 per inch, with a minimum charge of around $100 for the first stump. Published cost guides put most single stumps between about $120 and $400, and extra stumps on the same visit often cost $30 to $75 each.

Prices vary by city, stump size, the number of stumps, access for the grinder, and whether surface roots, chip cleanup and backfill are included. Full stump and root removal costs more than grinding: about $200 to $700 per stump in one US guide, and much more in some Canadian cities.

Grinding is usually the faster and cheaper choice, and it leaves the remaining roots to rot in place. Before work starts, buried lines must be marked. Ask whether the price includes raking out the chips, hauling them away and filling the hole.

When this service is needed

A stump is left after a tree removal and is in the way of mowing or a new lawn.
You want to plant, build a patio or lay a path where the stump sits.
The stump is a tripping hazard or keeps sending up new sprouts.
The rotting wood may be attracting insects such as carpenter ants or termites.

Repair vs replacement

For a stump, the choice is grind it, remove it fully, or leave it. Grinding removes the visible stump and lets you reseed or plant nearby, though a new tree usually should not go in the exact same spot because of the old roots and wood chips. Full removal is worth it when you plan to build or pour concrete right over the spot.

Leaving a stump costs nothing, and some people use one as a base for a planter or seat. It will rot over time, but that can take many years, and some species keep sending up sprouts. Chemical stump removers are sold for do-it-yourself use but work slowly.

Common problems to compare

A buried gas, water or cable line hit because no locate was requested.
Chips and soil left in a pile, or a hole that sinks later as the remaining roots rot.
A price that turns out to be per stump, or that leaves out the minimum charge.
Ruts or lawn damage from moving the grinder across wet ground.
Sprouts coming back from roots that were not ground.

Questions homeowners often ask

How much does stump grinding cost?

Published 2025 and 2026 US cost guides put most single stumps at about $120 to $400. Many companies charge about $2 to $5 per inch of diameter, with a minimum of about $100.

Is grinding or full removal better?

Grinding is cheaper and is enough for lawns and gardens. Full removal digs out the main roots and is used when you plan to build or pour concrete over the spot. It costs more, about $200 to $700 per stump in one US guide.

How deep does the grinder go?

Usually a few inches below ground level, enough to cover with soil and grass. Ask the company if you need it deeper for a planting bed or a path.

What happens to the wood chips?

Grinding leaves a pile of chips and soil. Some companies rake it into the hole or haul it away; others leave it for you to use as mulch. Haul-away can add about $50 to $200.

Is there a discount for several stumps?

Usually. After the first stump, extra stumps on the same visit often cost about $30 to $75 each, since the setup is already paid for.