Window Replacement Window unit, removal, and installation $350 - $2,500$500 - $2,800 CAD Common cost factors Window material: Vinyl at lower end; fiberglass, composite, and wood push costs higher.Window type/size: Casement, bay, bow, and custom shapes cost more than standard double-hung.Glass and options: Low-E, triple-pane, gas fill, laminated, and grids increase price.Installation complexity: Full-frame vs pocket install, rot repair, disposal, and access affect labor. Common price components Window unit - $250 - $1,400Factory window cost varying by material, type, size, and glazing package.Labor and installation supplies - $200 - $700Removal, prep, flashing, insulation, setting, sealing, and trim touch-up.Disposal and cleanup - $25 - $75Haul-away of old windows and site cleanup.Optional upgrades - $50 - $400Grids, hardware finishes, screens, higher-performance glass, permits where required.
Single Window Replacement Single window replacement $350 - $2,500$500 - $4,000 CAD Common cost factors Window type and size: Bay/bow or large/custom units cost more than standard single/double-hung.Frame material: Vinyl tends to be lowest; fiberglass and wood increase cost.Glass/options: Low-E, triple-pane, tint, grids, and impact-rated glass add cost.Installation complexity: Retrofit vs. full-frame, structural repairs, stucco/siding work, and access affect labor. Common price components Window unit - $250 - $1,000Standard vinyl to mid-tier units; premium materials and large/bay units higher.Labor and installation - $300 - $900Removal, install, insulation, shimming, sealing, interior/exterior trim touch-up.Disposal and materials - $50 - $150Old window haul-away, caulk/foam, fasteners, minor paint/trim supplies.
Double Pane Window Replacement Double-pane window replacement $250 - $2,000$500 - $2,500 CAD Common cost factors Window size and style: Larger openings and specialty styles increase materials and labor.Frame material and glass options: Vinyl vs. fiberglass/wood and low-E, tempered, or laminated glass affect cost.Installation complexity: Second-story, rotten framing, custom sizing, and exterior/interior trim raise labor.Quantity and economies of scale: Multiple windows may lower per-unit labor cost; single replacements trend higher. Common price components Window unit (double-pane) - $250 - $900Standard vinyl or mid-grade unit; higher for fiberglass/wood, custom sizes, low-E/tempered.Labor and installation supplies - $200 - $700Removal, installation, shims/insulation, sealants, disposal; more for complex access or repairs.Trim/flashing and finishing - $50 - $300Interior/exterior casing, capping, paint/caulk; varies by condition and scope.
Triple Pane Window Replacement Triple-pane window replacement $600 - $3,000$600 - $3,000 CAD Common cost factors Window size and style: Large openings, custom shapes, casement/awning vs. single-hung increase material and hardware costs.Frame material: Fiberglass, composite, and clad frames cost more than vinyl.Glass package and coatings: Low-E coatings, gas fill, and laminated or specialty glass add cost.Installation complexity: Full-frame replacement, rot repair, capping, and access constraints raise labor time. Common price components Triple-pane window unit - $400 - $2,200Window sash/frame, IGU, hardware; varies by size, frame, brand, and glass options.Labor and installation materials - $200 - $600Removal, disposal, install, shims/foam/flashing/sealant, exterior capping as needed.Full-frame or opening repairs (optional) - $150 - $600Sill/trim/rot repair, new jambs, interior trim adjustments if required.
Bay Window Installation Bay window unit and installation $1,200 - $7,000$1,800 - $8,000 CAD Common cost factors Window size and configuration: Larger projections and multi-lite units increase material and labor.Frame material and glass: Wood, composite, and premium glazing packages cost more than basic vinyl and double-pane.Structural support and framing: Load-bearing walls, roof tie-ins, and seat supports add carpentry time and materials.Exterior/interior finishes: Trim, insulation, flashing, painting, and sill/seat finishes add cost. Common price components Bay window unit - $900 - $3,000Factory-built bay assembly; cost varies by size, material (vinyl/wood/composite), and glazing.Installation labor - $700 - $2,200Removal (if replacing), setting, leveling, anchoring, insulating, and sealing.Structural and carpentry - $200 - $1,200Support cables/brackets, header or framing modifications, seat/sill build-out.Exterior weatherproofing/finishes - $150 - $700Flashing, exterior trim, cladding adjustments, caulking.Interior finishes - $150 - $600Trim, stool/apron, casing, paint/stain touch-ups.
Picture Window Installation Picture window unit and installation $350 - $3,000$500 - $3,500 CAD Common cost factors Window size and glass options: Large picture panes and upgrades like tempered, laminated, low‑E, or triple-pane increase material and handling costs.Frame material: Vinyl is lowest; fiberglass, composite, aluminum-clad, and wood increase price.Installation complexity: Structural modifications, stucco/siding repair, drywall/trim work, or second-story access add labor.Brand and warranty: Premium brands and extended warranties carry higher unit costs. Common price components Window unit (glass + frame) - $300 - $1,600Standard to premium picture window sizes; vinyl through wood/fiberglass; low‑E or upgraded glazing.Installation labor - $200 - $600Remove/replace, set, insulate, flash, and seal; typical first-floor, no structural changes.Finish and trim - $75 - $300Interior/exterior casing, paint/caulk touch-ups.Disposal and haul-away - $25 - $75Old window removal and site cleanup.Complexity/structural extras (if needed) - $150 - $800Enlarged openings, header work, stucco/siding repair, scaffolding or second-story access.
Basement Window Installation Basement window installation $350 - $1,800$1,000 - $6,000 CAD Common cost factors Window type/size: Egress or oversized units cost more than hopper/fixed replacements.Structural work: Cutting concrete, resizing openings, or adding wells significantly increases cost.Labor rates: Regional labor costs and company overhead vary.Access and site conditions: Difficult access, drainage, or finishing repairs add time and materials. Common price components Window unit and materials - $150 - $500Basement-rated hopper or slider, flashing, sealants, insulation, trim.Labor – standard replacement - $250 - $600Removal, prep, install, sealing, basic interior/exterior finishing.Disposal and cleanup - $25 - $75Haul away old window and debris.Contingency/complexity - Up to $300Rot repair, minor masonry touch-ups, difficult access.
Patio Door Replacement Patio door unit and replacement $800 - $7,000$1,500 - $12,000 CAD Common cost factors Door style and size: Sliding vs. French vs. multi-panel/bifold and oversized openings increase material and labor.Glass and energy options: Low‑E, impact, laminated, triple-pane, and custom grids raise price.Frame material: Vinyl typically costs less than fiberglass, aluminum-clad, or wood.Site conditions: Structural changes, rot repair, reframing, threshold work, or new rough opening add labor/materials. Common price components Patio door unit - $700 - $4,000Complete door assembly per style/material with standard glazing.Labor (standard replacement) - $500 - $1,500Remove old door, set new unit, plumb/level, fasten, insulate, basic weatherproofing.Finishing & materials - $150 - $600Flashing, sealants, shims, foam, interior/exterior trim touch‑ups.Upgrades & options - $250 - $2,000Low‑E/impact glass, grids, blinds‑between‑glass, premium hardware, custom colors.Structural or repair work (if needed) - $300 - $2,000Sill/rot repair, reframing, resizing/headers, stucco/siding remediation.
Sliding Door Replacement Sliding door unit and replacement $800 - $7,500$1,200 - $9,000 CAD Common cost factors Door size and panels: Two-panel vs. larger multi-panel units increase materials and labor.Frame/material: Vinyl vs. aluminum, fiberglass, or clad wood change unit cost.Glass package: Low-E, tempered, laminated, and triple-pane raise price.Installation complexity: Structural changes, sill pan/flashings, rot repair, and disposal add time/cost. Common price components Sliding door unit (2-panel) - $900 - $2,500Standard sizes; vinyl/aluminum with basic Low-E glass.Premium door upgrade - $800 - $3,000Fiberglass/wood-clad, larger sizes, enhanced glazing or impact-rated.Professional installation labor - $500 - $1,500Remove old unit, set new frame, plumb/square, insulate, trim, basic disposal.Flashing, trim, and weatherproofing - $100 - $400Sill pan, flashing tape, exterior/interior trim adjustments.Repairs and modifications (as needed) - $200 - $1,500Rot repair, reframing, threshold/sill work, permits.
Window Glass Replacement Glass pane replacement $150 - $900$250 - $900 CAD Common cost factors Glass type and thickness: Double-pane, laminated, tempered, Low-E, tinted, or custom shapes increase material cost.Unit size and configuration: Larger panes and multi-lite or specialty units require more material and labor.Access and labor complexity: Upper floors, sash disassembly, glazing stops, and frame condition affect labor time.Sealed IGU vs. single pane: Insulated glass units cost more than single-pane replacements. Common price components Glass/IGU materials - $80 - $350Single pane or insulated double-pane unit, Low‑E/tempered/tinted options, spacers and sealants.Labor - $100 - $350Remove broken glass/IGU, prep, install, seal, cleanup; added time for access or sash work.Disposal and supplies - $15 - $50Broken glass disposal, glazing points/stops, caulk, safety materials.Travel/minimum service charge - Up to $150Trip charge or minimum ticket for small jobs or remote locations.